Alcatel-Lucent OmniTouch Administration Manual page 52

System Configuration
............................................................................................................................................................................................................................................................
Proxy
SIP User Name
(optional)
Authorization User Name
(Appears if OXE 9.0 Spatial Redundancy Mode
is NOT enabled.)
Authorization Password
(Appears if OXE 9.0 Spatial Redundancy Mode
is NOT enabled.)
Realm
(Appears if OXE 9.0 Spatial Redundancy Mode
is NOT enabled.)
Server IP Name
(Only appears if OXE 9.0 Spatial Redundancy
Mode is enabled.)
DNS Server
(Only appears if OXE 9.0 Spatial Redundancy
Mode is enabled.)
Alternate DNS Server
(Only appears if OXE 9.0 Spatial Redundancy
Mode is enabled.)
Server IP Address (Port)
(Appears if OXE 9.0 Spatial Redundancy Mode
is NOT enabled.)
Alternate Server IP (Port)
(Appears if OXE 9.0 Spatial Redundancy Mode
is NOT enabled.)
............................................................................................................................................................................................................................................................
2 - 3 2
SIP proxies (VoIP configuration)
This is the SIP name that should be registered
with the proxy in this section. If the field is
blank, no registration will be sent, but other
elements in this section will still be used for
messages to this proxy.
SIP user names should not match
Note:
OmniTouch ACS user names because this is not
a supported configuration.
If the proxy requests authorization, this value
will be used as the authorization user name.
This is the password used by the SIP server for
authentication to allow access to the
OmniTouch ACS server.
This is the name of the server to be used. All SIP
messages to a SIP URL with this Realm as
hostname will be sent to the Server IP Address
for this proxy.
This is the name of the OXE 9.0 server. The
name is registered to the Proxy IP Addresses.
This is the IP Address of the primary OXE 9.0
server.
This is the IP Address of the secondary OXE 9.0
server.
This IP address may be different from the one
associated with the Realm (for example, SIP
aware NAT device). Intermediary
authentication takes place here before making
contact with the destination server (realm). The
default port number associated with the Server
IP Address is 5060. However, another port may
be specified.
If the Default Server IP Address is unavailable
for intermediary authentication, authentication
takes place at the Alternate Server IP .
8AL90208USAD ed01
November 20, 2008