Alcatel-Lucent OmniTouch Administration Manual page 161

Management Actions
............................................................................................................................................................................................................................................................
b. Select the
c.
Figure 3-14 Use DHCP
d. Configure your Network appropriately.
e. Reboot the server.
........................................................................................................................................................................................................................
Log into the Web Administration page on the server and upload the license obtained
3
when the system was purchased.
a. Click the
b. Click the
c. Locate the license file by using the
d. Click the
........................................................................................................................................................................................................................
Restore the server's configuration.
4
a. Click the
b. Click the
c. Click the
d. Click the
e. Click the
f. In the
Note:
*.ab, *.ac, etc. The file names will appear on the Administration screen. You must
locate (by using the
After all files are uploaded, the server automatically restores, and after restoration, the
system will reboot.
............................................................................................................................................................................................................................................................
8AL90208USAD ed01
November 20, 2008
Configure TCP/IP network parameter
appears. Select
Use DHCP
Configuration
item.
Licensing
button.
Upload
Configuration
Manual Server Restore
button to locate the *.md5 file from the latest backup of the
Browse
server.
button.
Restore
button in the resulting message dialog box.
OK
Files that need to be uploaded
*.a* files from the latest backup of the server.
There may be multiple files with the following sequential extensions: *.aa,
Browse
To restore configuration settings on the new server
or and press Enter.
Yes No
tab.
button.
Browse
tab.
item.
box, click the
button) and upload each individual file.
item.
button to select the
Browse
3 - 2 3