Selecting Radvision; Video Settings - Alcatel-Lucent OmniTouch Administration Manual

System Configuration
............................................................................................................................................................................................................................................................
Table 2-4 Video Settings
Video MCU Type
Video MCU IP Address
Video MCU Port
Enable Peer to Peer Video RTP
No P2P RTP Device List

Selecting RADVISION

My Teamwork supports the Radvision Scopia product line, software release 5.5 and 5.6,
for use with multipoint video conferencing funtionality.
Video Conference Type
provisioned numbered conference types are available. You can select one or contact your
Radvision MCU system administrator to arrange to have a new conference type created.
Retrieve Radvision service list now
any pre-provisioned conference types. If any new conference types have been created, they
will be present in the updated list.
............................................................................................................................................................................................................................................................
2 - 1 6
You can select the MCU from the drop-down
list to support point-to-point and multipoint
video conferencing. Based on your selection,
different settings appear.
Note:
for additional information regarding your
specific MCU.
This is the IP address of the selected MCU.
This is the port used for communication
between OmniTouch ACS and your Video
MCU IP Address.
If selected, peer-to-peer video is used for SIP
clients and OmniTouch ACS for 2-party video
(without the need of an MCU). If not
selected, peer-to-peer video may still be
available.
Note:
devices are Counterpath Eyebeam and the My
Teamwork web client. Other systems may
work, but they will not be supported by
Alcatel-Lucent.
This is a comma separated list of SIP devices
that do not support peer-to-peer RTP because
of SIP signaling issues. Video devices listed
here do not use peer-to-peer video.
– This is Radvision's conference type selector. Many pre-
– This allows availability of the most current list of
Selecting RADVISION
Refer to your MCU documentation
The only supported P2P clients or
8AL90208USAD ed01
November 20, 2008