Fields: System Options - Alcatel-Lucent OmniTouch Administration Manual

System Configuration
............................................................................................................................................................................................................................................................
Note:
relevant to your installation are automatically hidden.
Table 2-5 Fields: System Options
International Dialing Prefix
National Dialing Prefix
Country Code
Time Zone
Voice Interface Alarm Email
Voice Interface Alert Email
General Alarm Email
General Alert Email
Webserver Admin Email
............................................................................................................................................................................................................................................................
2 - 2 2
Not all options are available for all deployments. Options that are not
To configure system options
These are the digits used before dialing
international calls, from the site where the
Alcatel-Lucent OmniTouch Advanced
Communications Server (ACS) is installed.
These are the digits required to make domestic
toll calls.
This is the country code of the location where
the OmniTouch ACS is installed.
This is the time zone of the location where the
server is installed. This setting also determines
the default time zone used when scheduling
conferences.
This is the email address of the person who
gets notified of alarms on the T1 trunk
interface (typically the system administrator).
In an IP-only system, this setting does not
apply and will not appear.
This is the email address of the person who
gets notified of alerts on the T1 trunk
interface (typically the system administrator).
In an IP-only system, this setting does not
apply and will not appear.
Generally, Alerts convey important
Note:
status information and Alarms convey
information that may impede critical
processes.
This is the email address of the person who
gets notified of general alarms (typically the
system administrator).
This is the email address of the person who
gets notified of general alerts (typically the
system administrator).
This is the email address of the system
administrator. Webserver alerts are sent to this
address.
8AL90208USAD ed01
November 20, 2008