To Restore Configuration Settings On The New Primary Server - Alcatel-Lucent OmniTouch Administration Manual

Management Actions
............................................................................................................................................................................................................................................................

To restore configuration settings on the new Primary server

........................................................................................................................................................................................................................
Log into the Serial Administration console on the New Primary server:
1
Username: admin
Password: changeme
........................................................................................................................................................................................................................
Configure any required networking information.
2
a. Select
b.
c. Configure your Network appropriately.
d. Reboot the server.
........................................................................................................................................................................................................................
Log into the Web Administration page on the Primary server and upload the license
3
obtained when the system was purchased.
a. Click the
b. Click the
c. Locate the license file by using the
d. Click the
............................................................................................................................................................................................................................................................
8AL90208USAD ed01
November 20, 2008
Networking Configuration
appears. Select
Use DHCP
Configuration
item.
Licensing
button.
Upload
To restore configuration settings on the new Primary
.
or and press Enter.
Yes No
tab.
button.
Browse
server
3 - 9