Servers In A Stack - Alcatel-Lucent OmniTouch Administration Manual

System Configuration
............................................................................................................................................................................................................................................................
........................................................................................................................................................................................................................
Click
5 Save
The server will now reboot in its new configuration.
E O
N D
........................................................................................................................................................
Note:
home page will show the names of the servers in the stack. To select which server you
want to administer, click the name of that server. For example, in the screen below,
the system administrator is logged into dev08.dev.edial.office (the server name is in
black, on a white background). To switch to dev07.dev.edial.office or
dev05.dev.edial.office, you must click that server's name. It will change to black on a
white background, reflecting the fact that you are now administering it.
Figure 2-42 Servers in a Stack
Note:
and the
servers is dependant on System Configuration. (see
You should also choose a single name that will allow access to any of the servers in a stack.
This is the
SSL certificates are given out by IP address. In order to avoid server name and certificate
name mismatches, each server is configured with two IP addresses:
A specific server address
•
A cluster server address
•
The DNS server should map the specific server name (for example,
alcatel1.company.com) onto the specific server address. In addition, the DNS server
should map the cluster server name onto all of the cluster server addresses. Users access
............................................................................................................................................................................................................................................................
2 - 8 0
.
S
F T E P S
When multiple servers are configured as a stack, the System Administrator's
To access the stack alias in a stack, set the
Cluster IP Address
in the administration interface.
Server FQDN
for the group of stacked servers. The response order of the
To configure each server in a stack
to the stack alias
Cluster FQDN
"Domains" (p. 2-39))
8AL90208USAD ed01
November 20, 2008