Sample Rules With Blocking Results - Alcatel-Lucent OmniTouch Administration Manual

Advanced communication server (acs)
Table of Contents

Advertisement

Provisioning and Account Management
............................................................................................................................................................................................................................................................
Once you create a blocking rule, you can apply it to a user through that user's
Settings
Table 4-12 Sample Rules With Blocking Results
Number Dialed
+011-123-444-5555
Note:
with a +011 leaves the
number unchanged.
0111234445555
+1-617-234-5555
1-617-234-5555
6172345555
1(617)234-5555
Note:
be valid, the area code is
required. The number 1 will be
added by the system if the user
does not type it in.
The following examples present some typical blocking rules.
Note:
international numbers from the US" example, a call to
sip:01133140302010@gateway-ip-address would also be blocked.
s/^\+*011\d*/bar/
s/^\+*1*212\d*/bar/
s/^\+*011\d*/bar/\ns/^\+*1
*212\d*/bar/
............................................................................................................................................................................................................................................................
8AL90208USAD ed01
November 20, 2008
Page.
Starting any number
For a US number to
Blocking rules are also applied to sip addresses. Using the "block calling to
Blocking Result
+0111234445555 is a valid number.
The dashes were stripped.
International prefixes are configured in System Options
(see To configure system options).
+1234445555 is a valid number.
+country code phone number.
+16172345555 is a valid number.
Block calls to any number that begins (optionally) with +
and is followed by 011 and is followed by any number of
digits (international calls from the US)
Block calls to any number that begins (optionally) with +
and is followed by 1 and 212 and is followed by any number
of digits (calls to New York)
Block calls to any number that begins (optionally) with +
and is followed by 011 and is followed by any number of
digits, and block calls to any number that begins
(optionally) with + and is followed by 1 and 212 and is
followed by any number of digits (international calls from
the US and calls to New York)
Call blocking
User
4 - 5 1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Omnitouch advanced communication server 7.1.4

Table of Contents