Step 5: Add Services To A Project - Ricoh GlobalScan Administrator's Manual

Step 5: Add Services to a Project
Services can now be selected for a project. For instance, users in the Marketing Department may
require the Scan-to-Email service. In addition, the user may be required to log in (authenticate)
before using email. In that event, you will add the Email and Authentication service. After adding
the service(s) to the project, it will be necessary to configure the service(s), which is covered in
Step 7: Configure Services.
Important:
•
If you are adding the ActivePDF and/or OCR service to a project, you must install related
components on the GlobalScan Server. For more information, see GlobalScan v3.1 Server
Software Installation Guide
To add services to a project, proceed as follows:
1. Click the Manage Projects
Display reads:
2. Click the [Services] button associated with the project.
Display reads:
Pre-installation Requirements
menu link (or associated Home Page shortcut icon).
GlobalScan
Administrator's Guide
Plug-in Preparation.
TM
v3.1
63