Novell Authentication - Ricoh GlobalScan Administrator's Manual

Novell Authentication

In order to implement Novell Authentication, the Novell client and Novell ActiveX components
must be installed on the GlobalScan Server. For more information, see GlobalScan v3.1
Server Software Installation Guide
Component Installation.
After the necessary components are installed on the GlobalScan Server, you can enter Novell
Authentication settings as follows:
1. From the Manage Services
[Configure] button.
Display reads:
2. Select the level on which to establish Novell settings - system, profile or project. See LDAP
Authentication.
Note: If a Novell Tree and Context are applied to a specific Profile, this will allow connection
of different MFDs to different Novell Trees.
3. After selecting the level, set the following parameters:
•
Tree (Required) – This drop-down will allow you the select a default Novell tree for
Authentication purposes.
•
Context (Required) – This drop-down will allow you the select a default Novell
Context for Authentication purposes.
Additional Server Preparation
screen, click Novell Authentication
TM
GlobalScan
Administrator's Guide
Appendix H: Novell
or the associated
v3.1
87