Ldap Authentication - Ricoh GlobalScan Administrator's Manual

LDAP Authentication

1. From the Manage Services
button.
Note: If you wish to configure NT or Novell Authentication, proceed to that section.
Display reads:
Drag this bar to
change size of
window, if needed.
2. Choose the level to configure LDAP Authentication settings on....
System Level
By default, you enter the LDAP Configuration screen at the system level, as shown in
above screen. Settings made at the system level apply to all MFDs, unless you
change settings on the profile or project level.
Profile Level
In the screen to follow, the Accounting Dept. profile has been selected, thus LDAP
settings entered here will apply to that profile. Any projects within that profile will
inherit those values, unless changes are made on the project level.
screen, click LDAP Authentication, the associated
The asterisk (*) indicates that the field is required.
TM
GlobalScan v3.1
Administrator's Guide
Configure
82