Manual Mfd Configuration; Manual Mfd Configuration (Via Mfd Control Panel) - Ricoh GlobalScan Administrator's Manual

Manual MFD Configuration (via MFD control panel)

To manually enter MFD configuration settings, proceed as follows:
1. Press the [Scanner]
logged in to a GlobalScan project, press the [Logout] button.
The next screen to appear depends on how many projects are configured and whether or not
login is required. See Before Getting Started
2. On the MFD control panel, press and hold the [Clear/Stop] key (for more than 5 seconds),
then release.
Display reads:
Firmware version can also be viewed from
the WebAdmin module. See GlobalScan
Management A. Manage MFDs.
Important: MFDs running v2.x and v3.0 firmware can connect to a GlobalScan v3.1
server.
Parameter
GlbScan Server
(Required)
Proxy Server
HTTPS
Proxy Port
Proxy Username
Proxy Password
1
A control panel key other than the [Scanner] key may access GlobalScan.
1
key on the MFD control panel (once or twice). Note: If you are currently
GlobalScan Ver. 3.0 Configuration Screen
IP address of the GlobalScan Server or fully qualified domain
name.
Proxy server IP address or fully-qualified domain name.
HTTPS on/off.
Proxy server port number.
User name for access to proxy server.
Password for access to proxy server.
GlobalScan Terms, Projects, for details.
Description
TM
GlobalScan v3.1
Administrator's Guide
28