Mfd Reboot Rules - Ricoh GlobalScan Administrator's Manual

MFD Reboot Rules

In order for the GlobalScan Server and MFD to share configuration data, it may be necessary to
reboot the MFD. The conditions where reboot is required or not required are outlined below.
Following the chart are instructions on how to properly reboot the device - remotely (via the Web)
or manually (via the MFD's control panel).
Action
Modify MFD configure-
1
ation
2 Change MFD language
setting
3 Modify profile configur-
ation
4 Add/remove project(s)
to/from a profile
5 Add/remove Authenti-
cation service to/from a
project
6 Add/remove service(s)
to/from a project
7 Modify service config-
uration within existing
project
Manual Reboot Procedure (via MFD control panel)
1. Turn the Main Power button (shown at right) off. Wait until the green LED
stops blinking.
2. Turn the main rocker switch off. Location of this switch varies by MFD model.
3. Wait a moment, and then turn the MFD back on, using the main rocker
switch.
Via...
Manage MFDs screen
Remote MFD configuration
(via device IP address)
Manual MFD configuration
(via device control panel)
User Tools key on MFD
control panel
Manage Profiles screen
Manage Profiles screen
Manage Projects screen
Manage Projects screen
Manage Services screen
GlobalScan
Administrator's Guide
Example
Change IP address,
serial number or switch
profiles
Change MFD display
language from English to
Spanish
Change Profile Name,
MFD Reset Time and/or
Keep-alive Timer
Add/remove a project or
change project icon
Add/remove LDAP, NT
or Novell Authentication
service
Add/remove Email,
Scan-to-Folder, Image
Management, etc.
Within Scan Settings
configuration, change
resolution, duplex, color
scan, etc.
TM
v3.1
Reboot
Yes No
34