Rear bellcrank (black) removal
See
page 7-25
1.
Power off the printer.
2.
Remove the four toner cartridges, and leave the front door open.
3.
Remove the ITU assembly. See
4.
Check each of the rear bellcranks for cracks or breakage.
5.
Remove the spring.
6.
Remove the stop screw (A) and two washers (B). Be careful not to lose the washers. Recommend using a
magnetic tipped screwdriver to remove the screw.
for the part number for the parts packet, including the rear transfer bellcranks, for black.
"ITU assembly removal" on page
4-49.
Repair information
5061
4-81