Vacuum Transport Belt (Vtb) Removal - Lexmark C77x Service Manual

Vacuum transport belt (VTB) removal

See "Vacuum transport belt assembly" on page 7-11
1.
Remove the transfer plate assembly. See
2.
Remove the fuser bottom duct. See
3.
Remove the two front screws (A).
4.
Loosen belt (B) on redrive assembly, and remove from redrive gear.
5.
Remove belt from gear on vacuum belt transfer unit.
for the part number.
"Transfer plate assembly removal" on page
"Fuser bottom duct removal" on page
5061
4-94.
4-46.
4-95
Repair information