Table of Contents
Advertisement
5061
User attendance messages (continued)
User primary
message
Insert Tray <x>
Install bin <x>
Install duplex
Invalid Engine Code
Invalid file format
Invalid Network Code
Invalid PIN
ITU Life Warning
Load manual feeder
with <Custom Type>
Load manual feeder
with <Custom String>
Load manual feeder
with <size>
Load manual feeder
with <size> <type>
2-126
Service Manual
Explanation
This message is displayed when the printer requests the user to insert tray x before it
can continue printing the job. The printer needs to pick media from the missing tray or
the trays below it.
Tray=Tray 1, Tray 2, Tray 3, Tray 4, or Tray 5
Note: This message displays when refilling the trays during a job. Before filling tray x,
take the printer offline by pressing Stop, and wait for pages to read the output bin.
The following actions can be taken:
• Insert the requested tray, or
• Press Menu to access the Busy/Waiting Menu.
The following functions are available using the Busy/Waiting Menu:
- Cancel Job
- Reset Printer
- Reset Active Bin
- Check Supply Levels
This message is displayed when the user has Hot Unplugged a paper handling option
and the printer requires the reinstallation of the option to print a page which has been
formatted by an install Tray x interpreter prior to the removal of the option or Cancel
Job.
• Bin x (x=1, 2, or 3)
• Tray x (x=2, 3, or 4)
• Duplex
The following options can be taken:
• Insert the requested option, or
• Press Menu to access the Busy/Waiting Menu.
The following functions are available using the Busy/Waiting Menu.
- Cancel Job
- Reset Printer
- Reset Active Bin
- Check Supply Levels
Download valid engine code to the printer.
Note: You can download engine code while this message is displayed.
The selected file on the USB device is not valid.
Download valid code to the internal print server.
Note: You can download network code while this message is displayed.
Enter the correct PIN.
• Image transfer unit is near end of life.
• Press
to clear the message and print without installing a new ITU assembly.
• Replace the image transfer unit and, if necessary, reset the printer internal
counter for the image transfer unit.
• Load the specified paper in the manual feed tray or multipurpose feeder.
• Press
to ignore the manual feed request and print on paper already installed
in one of the input sources.
If the printer finds a tray that has paper of the correct type and size, it feeds paper
from that tray. If the printer cannot find a tray with the correct paper type and size,
it prints on whatever paper is installed in the default input source.
• Cancel the current job.
Advertisement
Table of Contents
