Table of Contents
Advertisement
User attendance messages (continued)
User primary
Explanation
message
37 Insufficient
This message is displayed when insufficient printer memory is available to perform
memory for Flash
Flash Memory Defragment operation.
Memory Defragment
This message appears prior to the actual start of the deframent operation.
operation
Press
To perform the defragment operation, you can:
Note: Menu Lockout does NOT prevent access to the Busy/Waiting Menu.
37 Insufficient
The printer was unable to restore some or all of the confidential or held jobs on the
memory, some held
hard disk.
jobs were deleted
Press
Note: Some of the confidential or held jobs remain on the disk but may not be
accessed.
38 Memory Full
This message is displayed when the printer is processing an incoming job and there
is not enough memory available to continue processing the job.
The following actions can be taken:
39 Page is too
This message is displayed when a page is too complex to print.
complex to print
The following actions can be taken:
Note: Menu Lockout does NOT prevent access to the Busy/Waiting Menu.
40 [color] invalid refill,
Replace the specified toner cartridge, and close the front cover.
change cartridge
to stop the defragment operation.
• Delete fonts, macros, and other data in RAM.
• Install additional printer memory.
• Press Menu to access the Busy/Waiting Menu.
The following functions are available using the Busy/Waiting Menu:
- Cancel Job
- Reset Printer
- Reset Active Bin
- Check Supply Levels
to clear the message.
• Determine how to make more memory available to your print job by:
- Deleting fonts, macros and other data in RAM.
- Simplify your print job.
- Install additional memory
• Press
to clear the message and continue printing.
The job may not print correctly.
• Press Menu to access the Busy/Waiting Menu.
The following functions may be available:
- Cancel Job
- Reset Printer
- Reset Active Bin
- Check Supply Levels
• Press
to clear the message and continue printing.
The job may not print correctly.
• Simplify the print job.
• Press Menu to access the Busy/Waiting Menu.
The following functions may be available:
- Cancel Job
- Reset Printer
- Reset Active Bin
- Check Supply Levels
2-131
Diagnostic information
5061
Advertisement
Table of Contents
