Table of Contents
Advertisement
5061
REGISTRATION
Use REGISTRATION to align the black image on the page. Use ALIGNMENT to align the individual colors. The
black image should be aligned before the individual colors are aligned.
To set Registration:
1.
Select REGISTRATION from the Diagnostics mode.
2.
Press
3.
Determine how values should change to align the arrows to the top, bottom, right, and left margins. Align
the Registration Line to the edge of the page.
4.
Select Top Margin.
5.
Press
or
The print registration range is:
Top Margin:
Bottom Margin:
Left Margin:
Right Margin:
Note: Adjusting the Top and Left margins moves the entire image. Adjusting the Bottom and Right
margins causes the image to expand or compress. It is easier to adjust the Top and Left margins first, then
adjust the Bottom and Right.
6.
Press Select (
7.
To verify the margin values are correct, print the Quick Test Page from the registration screen. Press
print the test page. While printing, Quick Test Printing... is displayed.
Once printing is complete, the Registration screen appears. See a sample of the
appendix page
3-10
Service Manual
to print the Quick Test Page. Current margin settings are listed on the printout.
REGISTRATION
Top Margin
Bottom Margin
Left Margin
to decrease or increase the value for Top Margin.
-25 to +25
-25 to +25
-15 to +15
-15 to +15
) to save the value. Submitting Selection... appears.
B-6.
Increasing the value moves the image down the page. Always adjust
the top before the bottom margin.
Increasing the value stretches the image toward the bottom of the
page.
Increasing the value moves the image toward the left margin.
Always adjust the left before the right margin.
Increasing the value compresses the image toward the left on the
page.
to
"Quick Test Page" on
Advertisement
Table of Contents
