Lexmark C77x Service Manual page 177

C77/c78 series
Hide thumbs Also See for C77x:
Table of Contents

Advertisement

User attendance messages (continued)
User primary
Explanation
message
63 Unformatted disk
82 Waste toner box
Press
nearly full
82 Replace Waste
toner box
82 Waste toner box
Install the waste toner box, and press
missing
83 ITU missing
Check the ITU release lever for correct operation. The ITU release lever is the black
lever located on the left upper side frame above the ITU opening and can be seen by
opening and lowering the MPF assembly. When locked, the lever should be at the 6
o'clock position. When unlocked, it should be in a 3 o'clock position. Undue pressure
is not required to operate the lever.
Turn the printer off, insert the ITU, move the lever to the 6 o'clock position, and turn
the printer back on.
If this does not resolve, replace the ITU assembly. See
page
Press
83 ITU life warning
83 Replace ITU
87 Fuser life warning
87 Fuser missing
Install the fuser unit. See
87 Replace Fuser
88 <color> cartridge
low
• Press
to clear the message and continue printing.
• Format the disk.
If the error message remains, the hard disk may be defective and require
replacing.
to clear the message and continue printing.
• Replace the waste toner box.
• Press
to clear the message and continue printing.
4-49.
to continue. The message persists until replacement.
• Press
to clear the message and continue printing.
• If print quality is unacceptable, replace the ITU assembly. See
removal" on page
4-49.
• Press
to clear the message and continue printing.
• If print quality is unacceptable, replace the ITU assembly. See
removal" on page
4-49.
• Press
to clear the message and continue printing.
• If print quality is unacceptable, replace the fuser. See
removal" on page
4-44.
"Fuser assembly removal" on page
• Press
to clear the message and continue printing.
• If print quality is unacceptable, replace the fuser. See
removal" on page
4-44.
• Replace the specified toner cartridge.
• Press
to clear the message and continue printing.
to clear the message and continue printing.
"ITU assembly removal" on
"ITU assembly
"ITU assembly
"Fuser assembly
4-44.
"Fuser assembly
Diagnostic information
5061
2-135

Advertisement

Table of Contents
loading

This manual is also suitable for:

C76xC780nC78xC770nC772nC782n

Table of Contents