Configure Sntp-Client Update-Interval - Extreme Networks ExtremeWare Command Reference Manual
Hide thumbs
Also See for ExtremeWare:
- Command reference manual (2620 pages) ,
- Command reference manual (2546 pages) ,
- Command reference manual (1598 pages)
Table of Contents
Advertisement
configure sntp-client update-interval
configure sntp-client update-interval
configure sntp-client update-interval <seconds>
Description
Configures the interval between polls for time information from SNTP servers.
Syntax Description
seconds
Specifies an interval in seconds.
Default
64 seconds.
Usage Guidelines
None.
Example
The following command configures the interval timer:
configure sntp-client update-interval 30
History
This command was first available in ExtremeWare 4.0.
Platform Availability
This command is available on all platforms.
ExtremeWare Software 7.3.0 Command Reference Guide
159
Advertisement
Table of Contents
