Product Description
Product Description
Names & Functions of Accessories
Figure 2-7 shows the names of standard accessories for the 16197A, and those of
accessories available in Option 001.
Figure 2-7
Accessories
Table 2-2
Names & Functions of Accessories
26
No.
Name
1
*1
Device guide
2
Blank device guide
3
*1
Electrode plate
4
Shorting bar set
5
Tweezers
6
Allen wrench
7
Magnifying glass
8
Cleaning rod
Option 001
Function
Used to position the DUT, etc. when connecting
it to the electrode
Used to prepare a device guide frame suited to a
DUT of a size not fitting any frame in the
attached device guide
Used to create various electrode spaces
Shorting bars in EIA/EIAJ sizes, and a case for
storing them. These bars are used during of
SHORT compensation.
Used to handle shorting bars, the DUT, etc.
Used to tighten/loosen hexagonal nuts
Used to magnify the view of a connector,
electrode, etc.
Used to clean the electrodes. Refer to "Cleaning
Rod," on page 54 in Chapter 4.
Chapter 2