System Board - Toshiba Tecra A8 Maintenance Manual

4.20 System board

4.20 System board

Removing the System board
To remove the system board, follow the steps below and refer to Figure 4-29.
1. Remove the insulator securing the HDD cable.
2. Remove the following screws and system board. Remove the small arrow portion in
the figure below first.
•
M2.5×6C
CAUTION: When removing the system board, do not touch the PC card slot.
M2.5×6C Tapping
System board
TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573)
Tapping screw
Wireless communication switch
Figure 4-29 Removing the system board
4 Replacement Procedures
×2
M2.5×6C Tapping
[CONFIDENTIAL]
Insulator
4-47