Toshiba Tecra A8 Maintenance Manual page 233

3.30 SETUP
FDD→CD-ROM→LAN→HDD:
CD-ROM→LAN→HDD→FDD:
CD-ROM→LAN→FDD→HDD:
NOTE: CD-ROM refers to a DVD-ROM&CD-R/RW drive or DVD Super Multi drive.
(b) HDD Priority
This option enables to select the priority for the Built-in HDD or USB.
Built-in HDD→ USB (Default)
USB → Built-in HDD
(c) Network Boot Protocol
Use this option to set the starting method via a network.
PXE Sets to PXE protocol. (Default)
RPL Sets to RPL protocol.
7. Others
Whether or not you need to configure the computer with these options depends
primarily on the kind of software or peripherals you use.
(a) Core-Multi Processing
The Core Multi-Processing sets the CPU operating mode of Core Multi-
Processor.
Enabled
Disabled
(b) Dynamic CPU Frequency Mode
Use this option to choose a setting from the followings.
Dynamically Switchable
TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573)
The computer looks for bootable files
in the following order: FDD, CD-ROM,
LAN and HDD.
The computer looks for bootable files
in the following order: CD-ROM, LAN,
HDD and FDD.
The computer looks for bootable files
in the following order: CD-ROM, LAN,
FDD and HDD.
Enables Core Multi-Processing functions. (Default)
Disables Core Multi-Processing functions.
Enables Intel SpeedStep technology. When the computer is
in use, the CPU power consumption and clock speed are
automatically switched when necessary. (Default)
3 Tests and Diagnostics
[CONFIDENTIAL] 3-99