Cd Sound (Legacy) Test - Toshiba Tecra A8 Maintenance Manual

3.29 Sound Test program
3.29.3.2 Audio CD
Insert an audio CD and the following menu appears in the display.
CD/DVD TEST
SUB-TEST : XX
PASS COUNT : XXXXX
WRITE DATA : XX
ADDRESS : XXXXXX
CD Sound track number (01-98 : Track) ?
Select the track number you want to test and press Enter twice.
The following message appears in the display and selected track is played.
Play start CD sound !
Press any key <play stop>
After pressing any key, the music stops and the display returns to the selection menu of the
track number.
When the CD-ROM test is executed, [ALL DEVICE] must be selected in the
NOTE:
"Device Config.=" of the BIOS SETUP. If the "ALL DEVICE" is not selected,
music can not be played.

3.29.4 CD Sound (Legacy) test

To execute the CD Sound (Legacy) test, select 4 and press Enter.
CAUTION: Sound (Legacy) test is not supported in this model.
TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573)
IN PROGRESS XXXXXXXX
ERROR COUNT: XXXXX
READ DATA
STATUS
Drive # = 0, ATAPI status =00
Command = XX
[[Block address = XXXXXXXX]]
[[Block length
Final : Block address = XXXXXXXXX
3 Tests and Diagnostics
xxxxxxx DIAGNOSTIC TEST VX.XX
[Ctrl]+[Break] ; test end
[Ctrl]+[C] ; key stop
: XX
: XXX
= XXXXXXXX]]
[CONFIDENTIAL] 3-89