Wireless Lan Card - Toshiba Tecra A8 Maintenance Manual

4.9 Wireless LAN card

4 Replacement Procedur es
4.9

Wireless LAN card

Removing the Wireless LAN card
To remove the wireless LAN card, follow the steps below and refer to Figure 4-14.
1. Disconnect the wireless LAN antenna cables (black and white) from the wireless
LAN card using an antenna coaxial cable disconnector.
2. Remove the following screw and wireless LAN card cover.
•
M2×4B
3. Remove the following screw securing the wireless LAN card.
•
M2×3C
4. With grasping both the sides, disconnect the wireless LAN card from the connector
CN2600 on the system board.
CAUTION: Do not touch the connectors on the wireless LAN card and computer. When
the foreign body adheres to the connector, it might cause the breakdown.
Security torx or M2x4B BIND
TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573)
BIND or Security torx screw
BIND screw
CN2600
Figure 4-14 Removing the wireless LAN card
4 Replacement Procedures
×1
×1
Wireless LAN card cover
Hook
M2x3C BIND
Wireless LAN antenna cable
Wireless LAN card
[CONFIDENTIAL] 4-25