Toshiba Tecra A8 Maintenance Manual page 211

3.28 LAN/Modem/Bluetooth/IEEE1394 Test Program
Table 3-6 Error code for Bluetooth test (BD_ADDR) (2/2)
Error code
0x20
0x21
0x22
0x23
0x24
0x25
0x26
0x27
0x28
0x29
0x2a
0x2b
0x2c
0x2d
0x2e
0x2f
See the Specification of the Bluetooth System in detail.
Subtest03 Communication tests (DUT mode)
This subtest checks the Bluetooth communication functions. Preparing the tester machine for
the Bluetooth test program. Insert a floppy disk containing the test program into the tester
machine and turn on the tester machine. The Bluetooth test menu will appear:
Press 3 to select the test and press Enter in the target machine. The following message will
appear:
When the test begins, the machine displays BD_ADDR of the DUT. The progress bar
stops when the test is completed. The following message is displayed.
-----------------------------------------------------------------------------
Bluetooth Subsystem T&D for PCSE(CS-Air) VerX.XX
-----------------------------------------------------------------------------
+----------------------+
| DUT
+----------------------+
Ready>>>>>>>>>>>>>>>>>>>>>>
TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573)
Unsupported LMP Parameter Value.
Role Change Not Allowed.
LMP Response Timeout.
LMP Error Transaction Collision.
LMP PDU Not Allowed.
Not Exist
Not Exist
Not Exist
Not Exist
Not Exist
Not Exist
Not Exist
Not Exist
Not Exist
Not Exist
Not Exist
| BD_ADDR of the DUT = XXXXXXXXXXXXX [h]
<- Progress Bar
[ESC] : Stop
3 Tests and Diagnostics
Meaning
Copyright (C) by TOSHIBA Co.
[CONFIDENTIAL] 3-77