4.13 Touch pad
4 Replacement Procedures
4.13 Touch pad
Removing the Touch pad
To remove the touch pad, follow the steps below and refer to Figure 4-21 and 4-22.
1. Remove the following screws securing the touch pad assembly.
•
×3 (Touch pad) or ×2 (Dual pad)
M2×5B
FLAT HEAD screw
Touch pad
Insulator
M2.5×5B FLAT HEAD
M2.5×5B FLAT HEAD
Dual pad
Insulator
Figure 4-21 Removing the touch pad (1)
TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573)
[CONFIDENTIAL]
4-35