4.22 HDD cable
4.22 HDD cable
To remove the HDD cable, follow the steps below and refer to Figure 4-31.
1. Peel off the insulator and disconnect the HDD cable from the connector CN1850 on
the system board.
Installing the HDD cable
To install the HDD cable, follow the steps below and refer to Figure 4-31.
1. Connect the HDD cable to the connector CN1850 on the system board and stick the
insulator.
TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573)
Insulator
CN1850
Figure 4-31 Removing the HDD cable
4 Replacement Procedures
HDD cable
[CONFIDENTIAL]
4-51