Toshiba Tecra A8 Maintenance Manual page 261

Maintenance manual
Hide thumbs Also See for Tecra A8:
Table of Contents

Advertisement

4.5 HDD
Installing the HDD
To install the HDD, follow the steps below and refer to Figure 4-5 to 4-7.
CAUTION: Do not hold the HDD by its top and bottom flat surfaces. It may damage the
HDD.
1. Install the HDD to the HDD Holder and secure them with the following screws.
M3×4C
CAUTION: Do not apply pressure to the center of the HDD assembly. It may damage
the HDD assembly. Hold the HDD assembly by its corners.
2. Set the connector of the HDD cable upward and connect the HDD assembly to the
connector of the HDD cable. Lay the HDD assembly down in the slot.
3. Install the HDD cover and secure it with the following screws.
M2.5×10B
TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573)
FLAT HEAD screw
FLAT HEAD screw
4 Replacement Procedures
×4
×2
[CONFIDENTIAL]
4-15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tecra a8 seriesSatellite pro a120

Table of Contents