Toshiba Tecra A8 Maintenance Manual page 321

4.30 Speaker
Installing the Speaker
To install the speaker, follow the steps below and refer to Figure 4-45 and 4-46.
1. Install the speakers (left and right) to the speaker covers (left and right).
2. Install the speakers (left and right) to the slots (left and right).
3. Turn up the insulator and arrange the speaker cables.
4. Stick two acetate tapes in place.
CAUTION: When installing the speaker and arrange the speaker cables, be careful of
the followings.
(Installing the speaker)
* Be careful the direction of the speakers.
* Make sure that the speaker cable pass under the guides (
TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573)
figure above.
4 Replacement Procedures
) in the
[CONFIDENTIAL] 4-75