4.29 Hinge
4.29 Hinge
Removing the Hinge
To remove the hinge, follow the steps below and refer to Figure 4-44.
1. Remove the following screw securing the left hinge. (Front of the cover assembly)
•
M2.5×4B
2. Turn over the cover assembly and remove the following screw and left hinge.
•
M2.5×6C
3. Remove the following screw and right hinge while releasing two hooks.
•
M2.5×6C
M2.5×6C Tapping
M2.5×4B FLAT HEAD
TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573)
FLAT HEAD screw
Tapping screw
Tapping screw
Figure 4-44 Removing the hinge
4 Replacement Procedures
×1
×1
×1
Hook
M2.5×6C Tapping
Hinge (left)
[CONFIDENTIAL]
Hinge (right)
4-71