Toshiba Tecra A8 Maintenance Manual page 278

4 Replacement Procedures
2. Push down the hook and slide the SW membrane in the direction in the figure below.
3. Remove the SW membrane.
Installing the SW membrane
To install the SW membrane, follow the steps below and refer to Figure 4-18 and 4-19.
1. Install the SW membrane to the slot while sliding it in the opposite direction in
removing.
2. Install the switch cover while engaging latches.
4-32 [CONFIDENTIAL]
SW membrane
Figure 4-19 Removing the SW membrane
TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573)
4.11 SW membrane
Hook