Wireless Lan Card - Toshiba PORTEGE R200 Maintenance Manual

4 Replacement Procedures

4.14 Wireless LAN card

Removing the Wireless LAN card
To remove the Wireless LAN card, follow the steps below and refer to Figure 4-21.
1. Disconnect the wireless LAN antenna cables (black and white) from the Wireless
2. Press the two latches outward to release the Wireless LAN card.
3. Disconnect the Wireless LAN card from the connector on the system board. Be
Installing the Wireless LAN card
To install the Wireless LAN card, follow the steps below and refer to Figure 4-21.
1. Insert the Wireless LAN card into the connector on the system board.
2. Gently push the Wireless LAN card down until the latches on both sides are engaged.
3. Connect the wireless LAN antenna cables (black and white) to the connectors on the
4-32
Downloaded from www.Manualslib.com
LAN card using an antenna coaxial cable disconnector.
careful not to damage the connector.
Latch
Figure 4-21 Removing the Wireless LAN card

Wireless LAN card.

[CONFIDENTIAL]
manuals search engine
Wireless LAN card
Wireless LAN antenna cable
(white)
PORTEGE R200 Maintenance Manual (960-519)
4.14 Wireless LAN card
Latch
Wireless LAN antenna cable
(black)