Wireless Lan Card Removal - Toshiba Satellite A10 Series Field Replaceable Unit Documentation

FIELD REPLACEABLE UNIT DOCUMENTATION

WIRELESS LAN CARD REMOVAL

Mini PCI slot cover
1. Turn the computer upside down.
2. Remove one M2.5x4 black flat head screw securing
the Mini PCI slot cover.
3. Lift out the PCI slot cover.
MODEM BOARD REMOVAL
Modem slot cover
1. Remove one M2.5x4 black flat head screw securing
the modem slot cover.
2. Insert your finger nail or the case separator into the
notched side of the cover and lift up to release the
latch securing the modem slot cover.
Satellite
A10 Series
M2.5x4 black flat head screw
M2.5x4 black flat head screws
TOSHIBA
Tough Enough for Today's World
TM
White mini coax cable
Mini PCI
card
4. Peel off the glass tape securing the mini coax cables.
5. Disconnect the white mini coax cable from main
connector and the black mini coax cable from
aux connector.
6. Gently press out the Mini PCI slot clips and pull the
Mini PCI card out of the connector on a 30 degree
angle.
Modem
MJ Harness
3. Remove two M2x4 black screws securing the
modem board.
4. Gently lift up the modem board to disconnect it from
the system board and disconnect the MJ harness
from JP1 on the modem board.
Black mini coax cable
PCI clips
M2x4 black screws