Show Isns; Show Logs - HP EVA P6000 User Manual

iSCSI Header Digests
iSCSI Data Digests
iSCSI Port
Port Status
Link Status
iSCSI Name
Firmware Revision
Current Port Speed
Programmed Port Speed
MTU Size
Window Size
MAC Address
IPv4 Address
IPv4 Subnet Mask
IPv4 Gateway Address
IPv4 Target TCP Port No.
IPv4 VLAN
IPv6 Address 1
IPv6 Address 2
IPv6 Link Local
IPv6 Default Router
IPv6 Target TCP Port No.
IPv6 VLAN
iSCSI Max First Burst
iSCSI Max Burst
iSCSI Header Digests
iSCSI Data Digests

Show iSNS

Displays Internet simple name service (iSNS) configuration information for the specified iSCSI port.
If you do not specify the port, this command displays the iSNS configuration information for all
iSCSI ports.
Authority
Syntax
Keywords
Example:
MEZ75 (admin) #> show isns
iSNS Information
----------------
iSNS
IP Address
TCP Port No.

Show logs

Displays either all or a portion of the module's event log.
Authority
Syntax
Keywords
Disabled
Disabled
GE4
Enabled
Up
iqn.2004-09.com.hp:fcgw.mez50.1.3
1.0.0.0
1Gb/FDX
Auto
Normal
32768
00-23-7d-f4-15-a8
0.0.0.0
0.0.0.0
0.0.0.0
3260
Disabled
::
::
fe80::223:7dff:fef4:15a8
::
3260
Disabled
65536
262144
Disabled
Disabled
None
show
isns
[port_num]
Enabled
10.3.6.33
3205
None
show logs
[last_x_entries]
[port_num]
The iSCSI port number whose iSNS configuration is to be
displayed.
[last_x_entries]
Shows only the last x number of module's log entries. For
example, show logs 10 displays the last ten entries in the
module event log. The show logs command (not specifying
number of entries) displays the entire module event log.
Commands 231