HP EVA P6000 User Manual page 164

Table 23 Error Messages (continued)
Status code value
25
Objects in your system are in use,
and their state prevents the
operation you wish to perform.
26
Parameter Object Does Not Exist
164 Error messages
Meaning
Several states can cause this message:
Case 1: The operation cannot be performed
because an association exists a related
object, or the object is in a progress state.
Case 2: The supplied virtual disk handle is
already an attribute of another derived unit.
This may indicate a programming error.
Case 3: One or more LUNs are presented
to EVA hosts that are based on this virtual
disk.
Case 4: Virtual disk clear data lost: The
virtual disk is in the non-mirrored delay
window.
Case 5: LDAD discard: The operation cannot
be performed because one or more virtual
disks still exist, the disk group still may be
recovering its capacity, or this is the last disk
group that exists.
Case 6: LDAD resolve condition: The disk
group contains a disk volume that is in a
data-lost state. This condition cannot be
resolved.
Case 7: Physical store erase volume: The
disk is a part of a disk group and cannot be
erased.
Case 8: Storage cell discard: The storage
cell contains one or more virtual disks or
LUN presentations.
Case 9: Storage cell client discard: = The
EVA host contains one or more LUN
presentations.
Case 10: Virtual disk discard: The virtual
disk is in use and cannot be discarded. This
may indicate a programming error.
Case 1 1: Virtual disk set capacity: The
capacity cannot be modified because the
virtual disk has a dependency on either a
snapshot or snapclone.
Case 12: Virtual disk set disk cache policy:
The virtual disk cache policy cannot be
modified while the virtual disk is presented
and enabled.
Case 13: VOLUME set requested usage: The
disk volume is already a member of a disk
group or is in the state of being removed
from a disk group.
Case 14: GROUP discard: The Continuous
Access group cannot be discarded as one
or more virtual disk members exist.
The operation cannot be performed because
the object does not exist. This can indicate
a user or program error.
VOLUME set requested usage: The disk
volume set requested usage cannot be
performed because the disk group does not
exist. This can indicate a user or program
error.
How to correct
Case 1: Either delete the associated
object or resolve the in progress state.
Case 2: Report the error to product
support.
Case 3: Unpresent the LUNs before
deleting this virtual disk.
Case 4: Resolve the delay before
performing the operation.
Case 5: Delete any remaining virtual
disks or wait for the used capacity to
reach zero before the disk group can
be deleted. If this is the last remaining
disk group, uninitialize the storage cell
to remove it.
Case 6: Report the error to product
support.
Case 7: The disk must be in a reserved
state before it can be erased.
Case 8: Delete the virtual disks or LUN
presentations before uninitializing the
storage cell.
Case 9: Delete the LUN presentations
before deleting the EVA host.
Case 10: Report the error to product
support.
Case 1 1: Resolve the situation before
attempting the operation again.
Case 12: Resolve the situation before
attempting the operation again.
Case 13: Select another disk or
remove the disk from the disk group
before making it a member of a
different disk group.
Case 14: Remove the virtual disks from
the group and retry the operation.
Report the error to product support.