Set System; Set Vpgroups - HP EVA P6000 User Manual
Enterprise virtual array
Hide thumbs
Also See for EVA P6000:
- Software manual (76 pages) ,
- Specification (47 pages) ,
- Reference (40 pages)
Table of Contents
Advertisement
-------------------------------------
Destination enabled (0=Enable, 1=Disable) [Disabled ]
Configuring SNMP Trap Destination 8 :
-------------------------------------
Destination enabled (0=Enable, 1=Disable) [Disabled ]
All attribute values that have been changed will now be saved.
Set system
Configures the module's system-wide parameters.
Authority
Syntax
Example 1:
MEZ50 (admin) #> set system
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
System Symbolic Name (Max = 64 characters)
Controller Lun AutoMap
Target Access Control
Telnet (0=Enable, 1=Disable)
SSH (0=Enable, 1=Disable)
All attribute values that have been changed will now be saved.
Example 2:
MEZ75 (admin) #> set system
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
System Symbolic Name (Max = 64 characters)
Target Presentation Mode (0=Auto, 1=Manual)
Controller Lun AutoMap
Target Access Control
Telnet (0=Enable, 1=Disable)
SSH (0=Enable, 1=Disable)
FTP (0=Enable, 1=Disable)
System Log Level (Default,Min=0, Max=2)
All attribute values that have been changed will now be saved.
Set VPGroups
Sets virtual port groups (VPGs) on the module. Allows you to enable and disable VPGs, and to
modify the VPG name.
Authority
Syntax
Example 1: The following example enables virtual port groups 2 and 3.
MEZ75 (admin) #> set vpgroups
The following wizard will query for attributes before persisting
and activating the updated mapping in the system configuration.
If you wish to terminate this wizard before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Configuring VpGroup: 1
Admin session
set system
(0=Enable, 1=Disable)
(0=Enable, 1=Disable)
(0=Enable, 1=Disable)
(0=Enable, 1=Disable)
Admin session
set vpgroups [vpgroup index]
[MEZ50-1
]
[Enabled
]
[Disabled
]
[Enabled
]
[Enabled
]
[MEZ75-1
]
[Auto
]
[Enabled
]
[Disabled
]
[Enabled
]
[Enabled
]
[Enabled
]
[0
]
Commands 221
Advertisement
Table of Contents
Troubleshooting
