I/O Module Leds; Rear Power And Uid Module - HP EVA P6000 User Manual

I/O module LEDs

LEDs on the I/O module provide status information about each I/O port and the entire module.
NOTE: The following image illustrates LEDs on the Small Form Factor I/O module.
LED
1. SAS Port Link
2. SAS Port Error
3. 7–segment
display
4. UID
5. Health
6. Fault

Rear power and UID module

The rear power and UID module includes status LEDs, a unit identification (UID) button, and the
power on/standby button.
LED icon LED color
n/a Green
n/a Amber
n/a n/a
Blue
Green
Amber
LED status Description
Off No cable, no power, or port not
connected
Blinking The port is being identified by an
application client
Solid Healthy, active link
Off Normal, no errors detected
Blinking Error detected by application client
Solid Error, fault conditions detected on
the port by the I/O module
Off No cable, no power, enclosure not
detected
Number The enclosure box number
Off Not being identified or no power
Solid Module is being identified, from
the management utility
Off No power or firmware malfunction
Blinking Enclosure is starting up and not
ready, performing POST
Solid Normal, power is on
Off Normal, no fault conditions
Blinking A fault of lesser importance
Solid A fault of greater importance, I/O
failed to start
SAS disk enclosures 19