Installing The Mpio Feature For Windows Server 2003 - HP EVA P6000 User Manual

Figure 34 MPIO Properties page after reboot
4. A final reboot is required to get the devices MPIO-ed.

Installing the MPIO feature for Windows Server 2003

For Windows Server 2003, if you are installing the initiator for the first time, check all the installation
option checkboxes and then click Next to continue
Figure 35 Software update installation wizard
To add or remove specific MS iSCSI software Initiator components after the initial install, run the
setup package executable and select the check box to add MPIO. The application automatically
checks the boxes for components that are already installed. For example, if you want to add the
MS MPIO component, leave the other check boxes unchecked; check only the MS MPIO check
box.
NOTE: The installation requires a reboot.
IMPORTANT: Windows XP Professional is not supported by Microsoft's MPIO.
(Figure 35 (page 91)).
Set up the iSCSI Initiator 91