Microsoft Cluster Server For Windows 2008; Requirements - HP EVA P6000 User Manual

Figure 59 iSCSI Persistent Reservation Setup window
3. Click Done to finish.
Each cluster is required to have its own value, and each node of a single cluster must have its own
value. For example, Cluster A could have the default setting of AABBCCCCBBAA. Possible node
settings:
Node 1 1
Node 2 2
Node 3 3
Node 4 4
When the HP Full Featured DSM for EVA is installed, it sets up Persistent Reservation in the registry
by default. For more information on the HP DSM, see:
http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?
contentType=SupportManual&lang=en&cc=us&docIndexId=64179&taskId=101&
prodTypeId=18964&prodSeriesId=421492

Microsoft Cluster Server for Windows 2008

iSCSI Failover clustering is supported on the HP StorageWorks MPX200 Multifunction Router. For
more information, see:
http://technet.microsoft.com/en-us/library/cc754482.aspx

Requirements

Operating system: Windows Server 2008 Enterprise, SP2, R2, x86/x64
Firmware: Minimum version—3.1.0.0, released November 2009
Initiator:
Multiple NIC/iSCSI HBA ports—four recommended
◦
–
–
–
MPIO—use HP DSM or the Microsoft Generic DSM. HP recommends using the latest
◦
available DSM.
Connectivity: Dual blade configuration for redundancy
1 18 iSCSI or iSCSI/FCoE configuration rules and guidelines
one public
one private
two storage, for higher availability and performance