HP EVA P6000 User Manual page 94

2. Run the Xtend SAN application to discover and configure the EVA iSCSI targets. The Xtend
SAN iSCSI Initiator can discover targets either by static address or iSNS.
For static address discovery:
a. Select Discover Targets and then select Discover by DNS/IP
Figure 36 Discover targets
b. Add the static IP address of the iSCSI or iSCSI/FCoE module's port in the Address field
and then select Finish
Figure 37 Add static IP address
c. Select a target from the Discovered Target list and then click Add
NOTE:
the Xtend SAN iSCSI Initiator. Select only one target from the list.
94 iSCSI or iSCSI/FCoE configuration rules and guidelines
(Figure 37 (page
The iSCSI or iSCSI/FCoE module's port may present several iSCSI targets to
(Figure 36 (page
94)).
94)).
(Figure 36 (page 94)).