Save; Set - HP EVA P6000 User Manual

Save

Saves logs and traces.
Authority
Syntax
Keywords
Example 1:
MEZ50 <1>(admin) #> save capture
Debug capture completed. Package is System_Capture.tar.gz
Please use FTP to extract the file out from the System.
Example 2:
MEZ50 <1>(admin) #> save logs
Save Event Logs completed. Package is System_Evl.tar.gz
Please use FTP to extract the file out from the System.
Example 3: Save traces is not supported by the iSCSI or iSCSI/FCoE modules.
MEZ50 (admin) #> save traces
Save ASIC Traces failed.

Set

Configures general iSCSI or iSCSI/FCoE parameters, as well as parameters that are specific to
the FC, iSCSI, and management ports.
Command
Set
Admin session
save
capture
logs
traces
iSCSI module
alias
chap
fc [<PORT_NUM>]
features
iscsi [<PORT_NUM>]
isns
mgmt
ntp
properties
snmp [trap_destinations [<DEST_NUM>]]
system
capture
logs
traces
The save capture command creates a debug file that captures
all debug dump data. After the command completes, you must FTP
the debug capture file from the module.
The save logs command creates a tar file that contains the
module's log data, storing the file in the module's /var/ftp
directory. After the command completes, you must FTP the log's tar
file from the module.
The save traces command creates a tar file that contains the
module's dump data, storing the tar file in the module's /var/ftp
directory. After the command completes, you must FTP the trace's
tar file from the module. After executing this command, the system
notifies you if the module does not have any dump data. Each time
it generates dump data, the system adds an event log entry.
iSCSI/FCoE module
alias
chap
chassis
fc [<PORT_NUM>]
features
iscsi [<PORT_NUM>]
isns
mgmt
ntp
properties
snmp [trap_destinations [<DEST_NUM>]]
system
vpgroups [vpgroup index]
Commands 213