HP EVA P6000 User Manual page 165

Table 23 Error Messages (continued)
Status code value
27
Target Object Does Not Exist
28
Timeout
29
Unknown Id
30
Unknown Parameter Handle
31
Unrecoverable Media Error
32
Invalid State
33
Transport Error
34
Volume is Missing
35
Invalid Cursor
36
Invalid Target for the Operation
37
No More Events
38
Lock Busy
39
Time Not Set
40
Not a Supported Version
41
No Logical Disk for Vdisk
42
Virtual disk Presented
43
Operation Denied On Slave
44
Not licensed for data replication
Meaning
The operation cannot be performed because
the object does not exist. This can indicate
a user or program error.
A timeout has occurred in processing the
request.
This error is no longer supported.
This error is no longer supported.
The operation could not be completed
because one or more of the disk media had
an unrecoverable error.
This error is no longer supported.
A SCMI transport error has occurred.
The operation could not be completed
because the drive volume is in a missing
state.
The supplied cursor or sequence number is
invalid. This may indicate a user or program
error.
The specified target virtual disk already has
an existing data sharing relationship. This
can indicate a user or program error.
There are no more events to retrieve. (This
message is informational only.)
The command lock is busy and being held
by another process.
The storage system time is not set. The
storage system time is set automatically by
the management software.
The requested operation is not supported by
this firmware version. This can indicate a
user or program error.
This is an internal error.
The virtual disk specified is already
presented to the client and the requested
operation is not allowed.
The request is not allowed on the slave
controller. This can indicate a user or
program error.
This error is no longer supported.
How to correct
Report the error to product support.
Verify the hardware connections and
that communication to the device is
successful.
Report the error to product support.
Report the error to product support.
Report the error to product support.
Report the error to product support.
Verify the hardware connections,
communication to the device, and that
the management software is operating
successfully.
Resolve the condition and retry the
request. Report the error to product
support.
Report the error to product support.
Report the error to product support.
No action required.
Retry the request at a later time.
Report the error to product support.
Report the error to product support.
Report the error to product support.
Delete the associated presentation(s)
and retry the request.
Report the error to product support.
Report the error to product support.
165