Hba Configuration; Risks; Limitations - HP EVA P6000 User Manual

becomes an ordinary virtual disk, you may present that virtual disk as you would any other
ordinary virtual disk.
HBA must be properly configured to work in a single HBA server configuration. The user is
required to:
◦ Download and extract the contents of the TAR file.

HBA configuration

Host 1 is a single path HBA host.
Host 2 is a multiple HBA host with multipathing software.
See Figure 65 (page

Risks

Single path failure may result in loss of data accessibility and loss of host data that has not
been written to storage.
Controller shutdown results in loss of data accessibility and loss of host data that has not been
written to storage.
NOTE: For additional risks, see

Limitations

HP P6000 Continuous Access is not supported with single path configurations.
Single path HBA server is not part of a cluster.
Booting from the SAN is not supported.
Figure 65 Oracle Solaris configuration
1. Network interconnection
2. Single HBA server (Host 1)
3. Dual HBA server (Host 2)
4. Management server
139).
"Oracle Solaris" (page 148).
5. SAN switch 1
6. SAN switch 2
7. Controller A
8. Controller B
Oracle Solaris configuration 139