HP EVA P6000 User Manual page 273

Table 31 iSCSI or iSCSI/FCoE module log messages (continued)
74659
#%d: QLReadyTimer: Adapter
missed heartbeat for 0x%x
seconds
74660
#%d: QLReadyTimer: Abort
pTpb=%p failed, DrvCount
0x%x
74661
#%d: QLTimer: Abort pTpb=%p,
Type %x, Timeout 0x%x
DrvCount 0x%x, DdbIndex 0x%x
74663
#%d: QLReadyTimer: MBOX_CMD
%04x %04x %04x %04x %04x
%04x %04x %04x timed out
74665
#%d: QLReadyTimer:
QLiSNSReenable failed.
74705
#%d: QLProcessSystemError:
Restart RISC
74746
#%d: QLInitializeFW:
MBOX_CMD_INITIALIZE_FIRMWARE
failed %04x %04x %04x %04x
%04x %04x
74784
#%d: QLUpdateInitiatorData:
No more room in Initiator
Database.
74800
#%d: QLSetTargetData: No
more room in Target
Database.
75008
#%d: ql_process_error:
OB_TCP_IOCB_RSP_W returned
DdbInx 0x%x pTpb %p
86347
#%d: QLDisable: Restart RISC
86349
#%d: QLEnable: Restart RISC
to update EEPROM
86874
#%d: QLIsrDecodeMailbox:
Link up
87346
#%d: QLGetFwStateCallback:
link 100Mb FDX
87348
#%d: QLGetFwStateCallback:
link 1000Mb FDX
87350
#%d: QLGetFwStateCallback:
Invalid link speed 0x%x
102419
#%d: qlutm_init: Diagnostic
failed, port 1 invalid SRAM
102420
#%d: qlutm_init: Diagnostic
failed, port 1 POST failed
102421
#%d: qlutm_init: Diagnostic
failed, port 2 invalid SRAM
102422
#%d: qlutm_init: Diagnostic
failed, port 2 POST failed
iSCSI Error iSCSI processor (adapter) failed to provide a
heartbeat for x seconds.
iSCSI Error iSCSI processor failed to complete an abort request.
iSCSI Error Driver timed out an iSCSI processor operation and
is aborting the operation.
iSCSI Error Driver timed out an iSCSI processor mailbox
command.
iSCSI Error Driver timed out while attempting to reconnect with
the iSNS.
iSCSI Error iSCSI processor was restarted.
iSCSI Error iSCSI processor rejected the firmware initialize
command.
iSCSI Error Driver's initiator database is full. The driver is
capable of storing 1024 iSCSI initiators in its
database. Use the CLI or GUI to remove
unwanted/unused iSCSI initiators.
iSCSI Error Driver's target database is full. Use the CLI or GUI
to remove unwanted/unused iSCSI targets.
iSCSI Error TCP retry for a frame failed on the connection
ddbIndex. Tpb contains the frame memory
address.
iSCSI Info Restart iSCSI processor (RISC).
iSCSI Info EEPROM updated, restart iSCSI processor (RISC).
iSCSI Info Link up reported by iSCSI processor for GE1 or GE
2.
iSCSI Info iSCSI controller reported a link speed/configuration
of 100 Mb full-duplex (FDX).
iSCSI Info iSCSI controller reported a link speed/configuration
of 1000 Mb FDX.
iSCSI Info iSCSI controller reported an invalid link speed.
FC Fatal FC1 processor SRAM test failed.
FC Fatal FC1 processor power-on self-test (POST) failed.
FC Fatal FC2 processor SRAM test failed.
FC Fatal FC2 processor POST failed.
273