Working With Iscsi Or Iscsi/Fcoe Module Configurations - HP EVA P6000 User Manual

System Information
--------------------
Product Name
Symbolic Name
System Mode
Controller Slot
Controller Lun AutoMap
Target Access Control
Serial Number
HW Version
SW Version
Boot Loader Version
No. of FC Ports
No. of iSCSI Ports
Telnet
SSH
Temp (C)
MEZ50 (admin) #>

Working with iSCSI or iSCSI/FCoE module configurations

Successfully managing iSCSI and iSCSI/FCoE modules with the CLI depends on effective module
configurations. Key module management tasks include modifying configurations, backing up
configurations, and restoring configurations.
Status viewing through the use of the show commands can be quite helpful in collecting information
needed to resolve problems.
show fc
show iscsi
show perf
show stats
show luns
show luninfo
show initiators
show initiators_lunmask
show targets
show presented_targets
show system
show logs nn
NOTE: Mapping and unmapping LUNs through the CLI is likely to result in inconsistencies with
HP P6000 Command View and is not recommended by HP. There may be cases where a CLI reset
mappings is a more effective method of addressing these inconsistencies than using the CLI lunmask
add or lunmask rm commands.
248 Using the iSCSI CLI
HP StorageWorks MEZ50
MEZ50-1
iSCSI Server Connectivity
Left
Enabled
Disabled
1808ZJ03297
01
3.0.3.9
1.1.1.9
2
4
Enabled
Enabled
36