Getting Started
Reading the LED lamps
2
A
Yellow: Lights up when 10BASE-T connection is properly established. Flash-
es when data is being transmitted.
B
Green: Lights up when 100BASE-TX connection is properly established.
Flashes when data is being transmitted.
Connecting to a Telephone Line
You can connect the machine to the public switched telephone network (PSTN)
directly or through a private branch exchange (PBX).
Also, you can connect an external telephone to use the same telephone line for
voice calls.
R CAUTION:
•
communication line cord.
R ATTENTION:
•
26 AWG ou plus grand cordon de télécommunication.
Important
❒
ber identification (your fax number) into your machine before you can con-
nect to the public phone system.
❒ Make sure the connector is the correct type before you start.
44
BSP048S
: To reduce the risk of fire, use only No. 26 AWG or larger tele-
: Pour réduire le risque d'incendie, utilisez uniquement des No.
: By law in the United States, you must program your phone num-