Saving Energy - Ricoh Aficio SP 3400SF User Manual

❖ Fax mode
Press the {Facsimile} key to activate fax mode. While in fax mode, the {Facsim-
ile} key lights up.
❖ Function Priority
By default, copy mode is selected when the machine is turned on, or if the pre-
set [Auto Clear] time passes with no operation while the initial screen of the
current mode is displayed. You can change the selected mode using [Default
Mode] under [Admin Settings].
Reference
For details about [Auto Clear] or [Default Mode], see p.233 "Administrator
Settings".

Saving Energy

This machine is equipped with the following Energy Saver modes: Energy Saver
mode 1 and Energy Saver mode 2. If the machine has been idle for a certain pe-
riod of time, the machine automatically enters Energy Saver mode.
The machine recovers from Energy Saver mode when it receives a print job,
prints a received fax, or when the {Copy} or {Start} key is pressed.
❖ Energy Saver mode 1
If [EnergySaverMode1] under [Admin Settings] is enabled, the machine enters En-
ergy Saver mode 1 if the machine has been idle for about 30 seconds. When
the machine is in Energy Saver mode 1, the backlight of the screen is turned
off and "
EnergySaverMode1
cover from Energy Saver mode 1 than from power-off state or Energy Saver
mode 2, but power consumption is higher in Energy Saver mode 1 than in En-
ergy Saver mode 2.
❖ Energy Saver mode 2
If [EnergySaverMode2] under [Admin Settings] is enabled, the machine enters En-
ergy Saver mode 2 after the period of time specified for this setting is passed.
When the machine is in Energy Saver mode 2, the backlight of the screen is
turned off and "
EnergySaverMode2
tion is lower in Energy Saver mode 2 than in Energy Saver mode 1, but it takes
longer to recover from Energy Saver mode 2 than from Energy Saver mode 1.
BSP045S
" appears on the screen. It takes less time to re-
" appears on the screen. Power consump-
Installing the Machine
39
2