Configuring the Machine Using Web Image Monitor
Configuring the SNMP Settings
Click the [SNMP] tab on the network settings page to configure the SNMP set-
tings.
❖ SNMP Setting
Item
SNMP
❖ Trap
Item
8
Target Trap
SNMP Management Host 1
SNMP Management Host 2
❖ Community
Item
Get Community
Trap Community
260
Description
Select whether to enable the machine to use
SNMP services.
Description
Select whether to enable the machine to send
traps to the management host (NMS).
Enter the IP address or host name of a manage-
ment host. Can contain up to 32 characters.
Enter the IP address or host name of a manage-
ment host. Can contain up to 32 characters.
Description
Enter the community name to use for authen-
tication of Get requests. Can contain up to 32
characters.
Enter the community name to use for authen-
tication of Trap requests. Can contain up to 32
characters.