Specifying The Scanning Size According To The Size Of The Original - Ricoh Aficio SP 3400SF User Manual

Using the Scanner Function
❒ If you specify the last used destination, the preset scan settings become effec-
tive again, even if you have changed the settings for the previous job.

Specifying the scanning size according to the size of the original

This section describes how to specify the scanning size according to the size of
the current original.
A
Press the {Reduce/Enlarge} key.
5
B
Press the {Reduce/Enlarge} key or {U}{T} keys to select the size of the orig-
inal, and then press the {OK} key.
If you selected anything other than [Custom], you do not need to perform the
remaining steps of the procedure.
C
Press the {U}{T} keys to select [mm] or [Inch], and then press the {OK} key.
D
Enter the horizontal value using the number keys, and then press the {OK} key.
You can press the {U}{T} keys to change the value in 1 mm or 0.1 inch incre-
ments.
E
Enter the vertical value using the number keys, and then press the {OK} key.
You can press the {U}{T} keys to change the value in 1 mm or 0.1 inch incre-
ments.
Note
❒ Use the following keys to cancel settings:
• { }: Cancels the changes made to settings and returns the display to
the previous screen.
• {Clear/Stop}: Cancels the changes made to settings and returns the dis-
play to the initial screen.
❒ You can change the machine's default [Document Size] setting to always
scan originals with a specific scanning size.
❒ Temporary job settings are cleared in the following cases:
• When no input is received for the period of time specified in [Auto Clear]
while the initial screen is displayed.
• When the {Clear/Stop} key is pressed while the initial screen is displayed.
148
BSP093S