Specifying The Resolution - Ricoh Aficio SP 3400SF User Manual

Using the Fax Function

Specifying the resolution

This section describes how to specify the scan resolution for the current job.
There are three resolution settings:
❖ Standard
Select this when the original is a printed or typewritten document with nor-
mal-sized characters.
❖ Fine
Select this when the original is a document with small print.
❖ Photo
Select this when the original contains images such as photographs or shaded
drawings.
A
Press the {Image Quality} key.
6
B
Press the {Image Quality} key or {U}{T} keys to select the desired resolution
setting, and then press the {OK} key.
Note
❒ Press the { } key or {Clear/Stop} key to discard the current change and re-
turn to the initial screen.
❒ You can change the machine's default [Resolution] setting to always scan
with a specific resolution level.
❒ Temporary job settings are cleared in the following cases:
• When no input is received for the period of time specified in [Auto Clear]
while the initial screen is displayed.
• When the {Clear/Stop} key is pressed while the initial screen is displayed.
• When the machine's mode is changed.
• When the power is turned off.
• When the machine's default for the same setting is changed.
Reference
For details about [Resolution], see p.210 "Fax Transmission Settings".
For details about [Auto Clear], see p.233 "Administrator Settings".
180
BSP107S